Synthesis and characterization of poly(arylene ether)s containing 6‐(4‐hydroxyphenyl)pyridazin‐3(2H)‐one or 6‐(4‐hydroxyphenyl)pyridazine moieties

A series of novel soluble pyridazinone‐ or pyridazine‐containing poly(arylene ether)s were prepared by a polycondensation reaction. The pyridazinone monomer, 6‐(4‐hydroxyphenyl)pyridazin‐3(2H)‐one ( 1 ), was synthesized from the corresponding acetophenone and glyoxylic acid in a simple one‐pot reaction. The pyridazinone monomer was successfully copolymerized with bisphenol A (BPA) or 1,2‐dihydro‐4‐(4‐hydroxyphenyl)phthalazin‐1(2H)‐one (DHPZ) and bis(4‐fluorophenyl)sulfone to form high‐molecular‐weight polymers. The copolymers had inherent viscosities of 0.5–0.9 dL/g. The glass‐transition temperatures (T_g's) of the copolymers synthesized with BPA increased with increasing content of the pyridazinone monomer. The T_g's of the copolymers synthesized from DHPZ with different pyridazinone contents were similar to those of the two homopolymers. The homopolymers showed T_g's from 202 to 291 °C by differential scanning calorimetry. The 5% weight loss temperatures in nitrogen measured by thermogravimetric analysis were in the range of 411–500 °C. 4‐(6‐Chloropyridazin‐3‐yl)phenol ( 2 ) was synthesized from 1 via a simple one‐pot reaction. 2 was copolymerized with 4,4′‐isopropylidenediphenol and bis(4‐fluorophenyl)sulfone to form high‐T_g polymers. The copolymers with less than 80 mol % pyridazinone or chloropyridazine monomers were soluble in chlorinated solvents such as chloroform. The copolymers with higher pyridazinone contents and homopolymers were not soluble in chlorinated solvents but were still soluble in dipolar aprotic solvents such as N‐methylpyrrolidinone. The soluble polymers could be cast into flexible films from solution. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3328–3335, 2006     

LB膜中螺吡喃材料的光学性质研究

利用ＬＢ技术制备螺吡喃有序分子膜，研究了气液界面上螺吡喃材料在不同成份和不同ｐＨ值亚相时的成膜行为，着重研究了螺吡喃在ＬＢ膜这个特殊介质环境中不同于溶液的光致变色机理和光学性质     

双参数变形玻色湮没算符高次幂的本征态及其量子统计性质

本文构造了双参数变形玻色湮没算符高次幂a^'k(k≥3)的k个正交归一木征态的数学结构,发现它们能构成一个完备的Hilbert空间,并且讨论了它们的量子统计性质.     

裂解色谱法研究PMR型聚酰亚胺前体的反应过程

用裂解气相色谱法研究ＰＭＲ型聚酰亚胺前体在反应中的化学变化过程，以裂解产物醇和环戊二烯的生成率表示酰胺化或酰亚胺化及交联的程度，结果表明，酰胺化或酰亚胺化在５０℃以下不发生，在１８０～２２０℃完成，降冰片烯端基在１５０℃以下不发生交联反应，在２８０℃，１０～１８小时可完成交联反应。     

稀土复合型柴油催化助燃剂的研制及应用

采用铈、铂的有机配合物及碳酸酯制备出一种稀土复合型柴油催化助燃剂.通过发动机台架试验,表明添加剂可有效降低碳烟PM和NOz排放,并且发动机热效率有所提高.     

玻璃管负载纳米TiO2薄膜的制备及其对乙烯降解的研究

采用sol—gel技术，在细玻璃管表面制备了La掺杂复合TiO2薄膜，采用封闭循环装置考察了催化剂负载质量、镧掺杂量、热处理温度和湿度等因素对催化活性的影响．结果表明，随着薄膜层数的增加，乙烯降解率增加，UV-VIS在近紫外的吸收随层数的变化与之吻合；镧掺杂量为1.5％、热处理温度500℃催化剂活性最高，而湿度的增大有利于提高乙烯的降解率和降解速度．